Spectra HV101 - FOR YOUR SAFETY; General Safety Precautions

5
• Use of this product by people other than those trained on this product may result in exposure to hazardous
laser light.
• Do not remove warning labels from the unit.
• The HV101 is Class 3A/3R (< 5mW, 600 ... 680 nm).
• Never look into the laser beam or direct it to the eyes of other people.
• Always operate the unit in a way that prevents the beam from getting into people‘s eyes.
• If initial service is required, which results in the removal of the outer protective cover, removal must only be
performed by factory-trained personnel.
Thank you for choosing one of the Spectra Precision Lasers from the family of precision horizontal/vertical lasers.
The HV101 is a simple-to-use laser that allows you to take accurate horizontal/vertical measurements, 90°-
and plumb point transfer.
TABLE OF CONTENTS
FOR YOUR SAFETY 5
COMPONENTS 6
How to Use the Laser System 6
Powering the Laser 6
Laser Setup 6
 TurningOn/O󰀨theLaser 6
Activating/Deactivating Standby Mode 7
Using the Rotation Mode 7
Using the Pointing Mode 7
Using the Scan Mode 7
Using the Manual Mode 7
Using the Y- or X-Axis Single Slope Mode 7
APPLICATIONS 8
Interior 8
Acoustical Ceilings 8
Drywall and Partitions 8
Transferring Plumb Points to the Ceiling 8
General Construction 8
Determining the Height of Instrument (HI) 8
Using the Y-Axis Single Slope Mode 9
CALIBRATION 9
Checking Calibration of the Y- and X-Axes 9
Checking Calibration of the Z (Vertical) Axis 10
M101 WALL MOUNT 10
PROTECTING THE UNIT 10
CLEANING AND MAINTENANCE 11
PROTECTING THE ENVIRONMENT 11
WARRANTY 11
TECHNICAL DATA 11
FOR YOUR SAFETY
For hazardless and safe operation, read all the user guide instructions.
EN