BIOS SETUP
MB720 User’s Manual 33
Advanced BIOS Features
This section allows you to configure and improve your system and
allows you to set up some system features according to your preference.
Phoenix - Award WorkstationBIOS CMOS Setup Utility
Advanced BIOS Features
Hard Disk Booty Priority Press Enter ITEM HELP
Virus Warning Disabled Menu Level
CPU Internal Cache Enabled
CPU External Cache Enabled
CPU L2 Cache ECC Checking Enabled
Quick Power On Self Test Enabled
Quick Power On Self Test Enabled
First Boot Device CDROM
Second Boot Device Hard Disk
Third Boot Device LS120
Boot Other Device Enabled
Boot Up Floppy Seek Disabled
Boot Up Numlock Status On
Gate A20 Option Fast
Typematic Rate Setting Disabled
Typematic Rate (chars/Sec) 6
Typematic Delay (Msec) 250
Security Option Setup
APIC Mode Enabled
MPS Version Control for OS 1.4
OS Select For DRAM>64MB Non-OS2
HDD S.M.A.R.T. Capabitility Disabled
Hard Disk Booty Priority
This item allows you to arrange the priority of the devices where the
system boots from.
Virus Warning
This item protects the boot sector and partition table of your hard disk
against accidental modifications. If an attempt is made, the BIOS will
halt the system and display a warning message. If this occurs, you can
either allow the operation to continue or run an anti-virus program to
locate and remove the problem.
CPU Internal /External Cache
Cache memory is additional memory that is much faster than
conventional DRAM (system memory). CPUs from 486-type on up
contain internal cache memory, and most, but not all, modern PCs have
additional (external) cache memory. When the CPU requests data, the
system transfers the requested data from the main DRAM into cache
memory, for even faster access by the CPU. These items allow you to
enable (speed up memory access) or disable the cache function. By
default, these items are Enabled.
To Next Page
Loading...