BIOS SETUP
MB720 User’s Manual 41
SuperIO Device
Upon pressing Enter on this field, another window appears. Below are
the fields shown with their respective default settings:
Onboard FDC Controller – Disabled
Onboard Serial Port 1 – 3F8/IRQ4
Onboard Serial Port 2 – 2F8/IRQ3
UART Mode Select – Normal
Onboard Parallel port – 278/IRQ5
Parallel Port Mode – SPP
2nd PCI Device
Upon pressing Enter on this field, another window appears. Below are
the fields shown with their respective default settings:
Onboard Serial Port 3 – 3E8h
Serial Port 3 Use IRQ – IRQ11
Onboard Serial Port 4 – Disabled
Serial Port 4 Use IRQ – IRQ11
To Next Page
Loading...