Spectracom SAS36E User Manual

Spectracom Corporation EPSILON Switch & Amplifier System E
User’s Manual
4-11
1) SNMP RO community : Community name for Read-Only OIDs
2) SNMP RW community : Community name for Read-Write OIDs
3) Traps destination 1: Primary SNMP manager address where traps are sent
4) Traps destination 2: Secondary SNMP manager address where traps are sent
5) Traps Community: SNMP code word that helps in filtering the traps and identifying the
managed equipment family; public by default
6) Global traps enable: If "Yes", traps are sent according to individual enabling; if "No", no traps
are sent
7) Channel A Frequency Input Fault:
a. Yes: Generates a trap when the frequency signal input on channel A fails
b. No: No trap generated
8) Channel A 1PPS Input Fault:
a. Yes: Generates a trap when the 1PPS signal input on channel A fails and is monitored
b. No: No trap generated
9) Channel A TOD Input Fault:
a. Yes: Generates a trap when the ToD signal input on channel A fails and is monitored
b. No: No trap generated
10) Channel A Input Fault:
a. Yes: Generates a trap when an alarm input on channel A becomes active and is
monitored
b. No: No trap generated
11) Channel B Frequency Input Fault:
a. Yes: Generates a trap when the frequency signal input on channel B fails
b. No: No trap generated
12) Channel B 1PPS Input Fault:
a. Yes: Generates a trap when the 1PPS signal input on channel B fails and is monitored
b. No: No trap generated
13) Channel B TOD Input Fault:
a. Yes: Generates a trap when the ToD signal input on channel B fails and is monitored
b. No: No trap generated
14) Channel B Input Fault:
a. Yes: Generates a trap when an alarm input on channel B becomes active and is
monitored
b. No: No trap generated

Spectracom SAS36E Specifications

General

Brand	Spectracom
Model	SAS36E
Category	Switch
Language	English