Spectracom SAS36E User Manual

EPSILON Switch & Amplifier System E Spectracom Corporation
User’s Manual 4-14
1) NTP Parameters
a. Use NTP Server:
i. ENABLE: An NTP server is available on the network. The System
time is updated automatically on every “Request frequency”
ii. DISABLE: No NTP server is available on network. The system time
must be updated manually according to the fields for Time
Parameters .
b. NTP server Address: IP address of the NTP server in the network
c. Request frequency: Number of seconds between each request
2) Time Parameters
a. Date, Time, and Set button: Time manual setting when the field “Use
NTP Server” is disabled.
b. Manual Time Adjust: Adjust the time by 1 second when the field “Use
NTP Server” is disabled. Helpful for fine adjusting manually set time.

Spectracom SAS36E Specifications

General

Brand	Spectracom
Model	SAS36E
Category	Switch
Language	English