SpectraLink 7202 - Page 84

Spectralink 7202/7212 Handset User Guide
Spectralink 72-Series Handset User Guide.docx
April 2023 84
To Change Microphone Gain
1. Press Menu to enter main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Advanced, and press Select.
4. Scroll to Microphone gain, and press Select.
5. Scroll to the relevant option, and press Change.
Using Long Key
The long key function supports system features and defines a long key press to digits
between 0-9. The long key press can be defined as speed dials or as predefined MSF
signals.
MSF signals are system dependent. The MSF signal is sent to a server and not a specific
number. If supported by the subscribed system, an MSF signal sent to the system could for
example return system features to the handset. Contact your system administrator for more
information.
Speed dials are phone calls. For speed dials you can define Push to talk, meaning that
talking requires pressing left softkey while talking. When not pressing the left softkey you are
muted. For more information, see “Handset Keys” on page 16.
Note:
The long key function is not related to Alarm features.
To Change Long Key Definition
1. Press Menu to enter main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Advanced, and press Select.
4. Scroll to Long key, and press Select.
5. If you want to have all digits between 0-9 set as either Speed dial or MSF, press
Change to select either Speed dial or MSF.
If Speed dial is selected, you can also define Push to talk for the relevant digit
under Individual Settings. Scroll to Individual Settings, select relevant Speed dial,
and press Change, scroll to Push to talk, and press Change again.
6. If you want to define individual settings for each digit (a mix of Speed dial and MSF),
scroll to Individual Settings, and define the relevant action for each digit.