SpectraLink 7202 - Defining Alarm Settings

Spectralink 7202/7212 Handset User Guide
Spectralink 72-Series Handset User Guide.docx
April 2023 97
Activating the Alarm Button
The Alarm button can be configured in several different ways. Contact your system
administrator to find out which of these setting is active in your application:
• Is the Alarm button activated by a long press, two short presses or either?
• Does pressing the Alarm button place an emergency call?
• Does pressing the Alarm button sound an alarm through your handset’s
speakerphone?
• When an emergency call is placed, does the audio come through the speakerphone?
Note:
An emergency call preempts and terminates any existing active call. The emergency
call is ended by hanging up the call, as with a normal call, or by the far end hanging up.
However, the handset remains in the alarm state until manually cleared by the user.
Defining Alarm Settings
To Change Alarm Settings for the Alarm Button
1. Press Menu to enter main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Advanced, and press Select.
4. Scroll to Alarms, and press Select.
5. Scroll to Alarm key, and press Select.
6. Scroll to either Send MSF or Speed dial, and press Change.
If choosing Speed dial, you can also activate Loudspeaker.
Note:
If you have defined the Alarm button to work with Speed dial, A. empty is shown in the
Speed dial list in the Phone Book menu, and you can define a number to be dialed
when pressing the Alarm button.