SpectraLink 7202 - Page 86

Spectralink 7202/7212 Handset User Guide
Spectralink 72-Series Handset User Guide.docx
April 2023 86
2. Press Menu to enter main menu.
3. Scroll to Settings, and press Select.
4. Scroll to Advanced, and press Select.
5. Scroll to Master handset, and press Select.
6. Press OK to replace handset.
7. Enter the directory number of the handset to be replaced, and press OK.
8. Enter the IPEI of the new handset. For more information, see "To Check General
Information" on page 73.
9. Press OK to confirm the replacement. The data is updated automatically.
10. Press OK and subscribe the new handset. For more information, see "Login
(Subscription)" on page 87.
To Replace a Handset using Master Handset (Spectralink IP-DECT Server/Virtual
IP-DECT Server)
If registered as an admin rights user, the handset replacement can be done from the admin
rights user's handset in the Settings > Advanced > Master handset menu. If admin rights
are given when handset is in use, the handset must be turned off/on again for the Master
handset menu to appear. You must have access to both the handset to be replaced and
new handset in order to do the replacement
1. Ensure that you have the new handset charged and ready for use. You do not need
the old handset.
2. Identify the handset to be replaced. This information must be used when replacing
the handset. A handset can be identified in the following ways.
• Extension (numeric input)
• Username (alphanumeric input)
• Secondary username (numeric input)
• IPEI
For more information about identifying the IPEI, see "To Check General
Information" on page 73.
3. To invoke the admin rights user (master handset) feature though the menu of the
handset, do the following:
• Press Menu to enter main menu.
• Scroll to Settings, and press Select.
• Scroll to Advanced, and press Select.