SpectraLink 7202 - Page 94

Spectralink 7202/7212 Handset User Guide
Spectralink 72-Series Handset User Guide.docx
April 2023 94
3. Scroll to Advanced, and press Select.
4. Scroll to Flash LED on Call, and press Select.
5. Press Change to select between On or Off.
MSF Tones in a Call
When receiving an MSF type I/II while in a call, you can define the following options for the
MSF tone: Normal, Key click (key click sound is played), Key beep (key beep sound is
played) and Vibrate. You can choose Vibrate in connection with one of the other options.
Note:
Choosing key beep or key click overrides settings for the MSF message about alerts –
if the handset is in a call.
To Set MSF Tones for MSF type I/II
1. Press Menu to enter main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Advanced, and press Select.
4. Scroll to MSF Tones in a call, and press Select.
5. Scroll to the desired option, and press Change. You can choose Vibrate in
connection with one of the other options.
Echo Canceller
You can enable echo cancellation to prevent the far-end user from hearing echo. Enabling
echo cancelling does not prevent you from hearing echo. Echo cancelling is only applied to
the ear speaker; therefore, it cannot be used when the speakerphone is on. If you start using
echo cancellation on a site (e.g. manufacturing industry verticals), then it is highly
recommended, that echo cancellation is enabled on all handsets.
Note:
If echo cancellation is enabled, settings under Noisy environment are overruled. If
none of them are enabled, soft talk shift function is used.