4. CONTROLS
4.1 BUTTONS
4.2 DISPLAY AND ICONS
The AccuMAX meter uses a liquid crystal display (LCD) with a combination of easy-to-read icons and alphanumeric
characters to denote readings, units, operating mode and meter status in a four-line format. UV and VIS level
readings are automatically adjusted for the magnitude of the measurement (autoranging) and then displayed with the
appropriate 4-digit resolution units. For example: 12,000 µW/cm
2
would be displayed as 12.00 mW/cm
2
. This enables
the readout unit to accept and respond to a wide range of light levels. Icons provide a quick glance at data type and
the available functions at every operational screen.
•The sealed membrane keypad on the readout meter is equipped with five pressure-
sensitive buttons that provide multiple functions and easy operation. The ON/OFF
button turns the meter on and off. The four side-by-side buttons provide intuitive
customer interactive functions.
•The instrument will automatically turn itself off to preserve the battery life if no buttons
are pressed for 60 minutes.
Running man icon––
Meter in running operation
Bulb A icon––
Absolute readings displayed
Battery power bars
Open hand icon––
Holds data-constant display
Bulb Z icon––
Zero readings with ambient
light subtracted
Hourglass icon––
Integration of light levels––
continuous count
Mountain peak icon––
Peak value displayed
Snowflake icon––
Freezes data during integration
Circular arrows icon––
Integration in progress
7
To Next Page
Loading...