8
Settings Menu screen
Used for changing device features, setting rod length and working
with log files.
Use the arrow buttons to move to the desired option.
Use the MENU|SELECT button to toggle option choices.
Clear Average*: Clears the displayed average and count.
Note: Same as a press and hold of the READ|Down arrow button.
Rod Length: Select the Rod length See page 4 for options.
Soil Type: Selects the soil type used in measurements:
- Standard: for most mineral soils.
- Hi-Clay: for soils with higher clay content (> 27%).
- Sand: for sand based fields or turf greens.
Clear Logs*: Erases data logs from internal memory.
Save to USB*: Transfers data logs to a USB flash drive if at-
tached.
Backlight: Sets the LCD backlight: ON, OFF, AUTO. In AUTO
mode, the backlight will shut off 5 seconds after a button press
+GNSS Location, GNSS Power Save, GNSS Use QZSS: Ena-
ble or disable features related to geo-location capability (see p.
12).
+Bluetooth: Enable or disable Bluetooth connectivity to the
FieldScout™ Mobile app (See p. 20).
Sound: Enable or disable beep for audible feedback.
Temp Source: Changes displayed temperature from the Soil Sen-
sor to the IR Sensor (optional).
Temp Units: Fahrenheit or Celsius scale.
To Next Page
Loading...
