7
Display Screens
The TDR 150 has 3 main display screens;
- Startup Information (shown on previous page)
- Reading (figure 1)
- Settings Menu (see p. 8)
Note: An upgrade is required (see p. 27) to access GNSS and
Bluetooth features.
Startup Information screen
Initially displayed after first powered on.
- Displays firmware version information.
- Press and hold ON/OFF|BACK button to remain on this screen.
Reading screen
Measurements from the sensor are displayed on the Reading screen
along with rod size used, soil type, and a reading count with running
average.
Press READ to take readings, update Count and the Average.
Indicators:
Battery level icon: upper right corner.
Bluetooth icon: displayed when enabled. A bar appears
through it when not actively communicating.
GNSS location icon: When enabled,
Transitions from clear to dark as location
fix is achieved. Crosshatch appears when WAAS/EGNOS in use.
Figure 1.Sample Reading screen
To Next Page
Loading...
