10
Settings Menu screen
Used for changing device features, setting rod length and working
with log files.
Use the arrow buttons to move to the desired option.
The Select button toggles through option choices.
Clear Average*: Clears the displayed average and count.
Note: Same as pressing and holding the READ|Down arrow button
Rod Length: Select the Rod length. See page 4 for options.
Soil Type: Selects soil type used in measurements:
- Standard: for most soil types.
- Hi-Clay: for soils with higher clay content (> 27%).
- Sand: for sand based fields or turf greens.
Clear Logs*: Erases data logs from internal memory.
Save to USB*: Transfers data logs to a USB flash drive if attached.
Backlight: Sets the LCD backlight: ON, OFF, AUTO. In AUTO
mode, the backlight will shut off 5 seconds after a button press
Sound: Enable or disable beep for audible feedback.
Moisture Type: Selects displayed moisture mode VWC%, Period, or
TDR 300.
- VWC%: Volumetric Water Content with EC compensation.
- Period: Raw sensor reading in microseconds (us)
- TDR 300: VWC% without EC compensation
Auto-Off: Power off delay: 15, 30, 45, 60 minutes.
Current Date, Current Time: Displays or set the current time and
date values. See page 12 for details.
Timezone: Offset from Greenwich Mean Time. As the offset changes,
the Time and Date will update.
Daylight Savings: ON or OFF.
To Next Page
Loading...
Need help?
General
