EasyManuals Logo

Spectrum Technologies Fieldscout TDR 350 User Manual

Spectrum Technologies Fieldscout TDR 350
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
6
The FieldScout TDR meter will function properly under normal
conditions experienced in field use. The sensor block is sealed
and will not be damaged by immersion in water. The display is
not waterproof so it should not be used during heavy rainfall or
left exposed during irrigation events. If the display does get wet, it
should be dried out immediately.
Follow these tips to prolong the life of the device:
- Store in a cool and dry place when not in use.
- Keep the meter and probe rods clean and dry in between uses.
- Remove the batteries if not used for an extended period of time
(ie: between seasons).
Battery life
If the battery level is low or a
battery is inserted incorrectly,
the low battery icon appears on
the screen briefly then, the dis-
play will power off.
Battery life is affected by the
enabled features, accessories
connected, and the frequency of use. If not needed, the Bluetooth,
GNSS Location and backlight features can be disabled individual-
ly. The backlight can be disabled or set to AUTO mode (p. 10)
which allows enough time to see new measurements and then will
power down the backlight to conserve the battery life.
Meter Care
Total Readings
Bluetooth GPS Backlight Alkaline Lithium
ON ON ON 12,000 24,000
ON ON OFF 24,000 35,000
OFF OFF OFF 150,000 225,000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Spectrum Technologies Fieldscout TDR 350 and is the answer not in the manual?

Spectrum Technologies Fieldscout TDR 350 Specifications

General IconGeneral
BrandSpectrum Technologies
ModelFieldscout TDR 350
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals