To Next PageTo Next Page
Need help?Do you have a question about the Spectrum FIELDSCOUT TDR 100 and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Power Supply | 4 AA batteries |
| Applications | Agriculture, Research |
| Measurement Range | 0 to 100% |
| Accuracy | ±3% VWC |
| Resolution | 0.1% VWC |
| Operating Temperature | 0°C to 50°C |
Manages meter power, displaying status, battery, and firmware information.
Reads the probe, updates screen values, and clears the last data point from the running average.
Removes the last data point from the running average or resets the entire running average.
Allows selection of measurement type or probe rod length.
Sets the probe rod length (Turf, Short, Medium, Long) for accurate readings.
Enables meter calibration procedure in air and distilled water.
Explains Standard and High Clay modes for VWC and their usage.
Details display elements like PL, N, and A for VWC readings.
Explains RWC, set points, and Water Deficit calculations.
Describes the second line of the LCD for RWC: Average, Number, and soil type.
Details connecting the meter to a PC using interface cable and software.
Instructions for accessing the battery compartment and installing AAA batteries.
Guides on selecting the correct COM port for PC communication.
Explains how to select the TDR option from available Field Scout meters.
Describes accessing meter and data logger configuration.
Setting meter name and choosing English/metric units for RWC mode.
Configuring wet and dry set points for RWC modes.
Enabling RWC modes and assigning descriptive names (5 chars).
Details the three display modes: VWC, RWC, and Measurement Period.
Provides formulas for calculating VWC from gravimetric data and period readings.
Test for period reading with no rods attached (1920 ± 30).
Tests in air, distilled water, and saturated sand for VWC readings.
Troubleshooting 'VWC%=ERR!' due to rod length or probe damage.
Troubleshooting VWC near 0% in wet soil, indicating potential component damage.
Troubleshooting PC communication for Meter Settings screen.
Details product warranty coverage and terms.
States product conformity with relevant directives and standards.
