4. SOFTWARE
1.Scene and camera
Spedal has specially developed collaborative software for our camera
products. You can visit our official website http://spedal.cc to download the
full-featured version of the software (Mac and Windows versions) and its
manual on the Support interface.
You can add multiple scenes or multiple cameras to record real-time images
from multiple angles and integrate them into the same image. You can also
make individual adjustments to the scene or any screen of the camera
through other functions of this software.
2.Filter
You can choose different filters to add to the recorded picture, so as to
achieve a better picture rendering effect. Since the picture rendering effect is
affected by ambient light or other environmental factors, it is recommended
that you select and use the appropriate filter, and then further modify the
picture through the basic settings in the function module to achieve the best
performance effect.
3.Function
The brightness, contrast, gamma, hue shift, transparency, and saturation of
the screen can be adjusted to neutralize the lack of ambient light. You can
also crop the screen left, right, up and down. When using multiple scenes or
multiple cameras, the cropping function can make the multiple images more
harmonious.
4.Mixer
The microphone volume of the camera can be adjusted.
01 02 03 04
05 06 07 08 09
10 11 12 13 14
15 16 17 18 19
To Next Page
Loading...