Cirtix series Brushless Speed Controller manual For
“RS1/RS20602010A/100524” Page - 5 -
ESC PC Program Method and update ESC software:
1.The Speed passion Program Card is used to make all adjustments to the active profile in your ESC.
Any active profile can be modified by PC software with Cirtix ESC PC-USB adaptor. Connect the Cirtix
ESC PC-USB adaptor PN#SPESCPB02 with USB cable to your PC or Laptop
computer.
2. Insert Speed passion CD-ROM to your PC or Laptop computer.
3. Plug the Cirtix ESC PC-USB adaptor into your PC or laptop computer.
4. Connect the SPEED PASSION Cirtix ESC PC-USB adaptor to the mini USB
connector on the USB Cable
5. You will be prompted to install the device drivers, they are both unsigned to select OK and continue.
After a few moments, the USB adapter LED will turn from Red to Blue.
6. If your Adapter LED remains Red, then disconnect the Adapter, wait a minute and then reconnect. If
the Blue LED does not come on, reboot your system.
7. You will be prompted to install the device drivers, they are both unsigned to select OK and continue.
After a few moments, the USB adapter LED will turn from Red to Blue.
8. If your Adapter LED remains Red, then disconnect the Adapter, wait a minute and then reconnect. If
the Blue LED does not come on, please reboot.
9. Note: If working with Windows 2000, you will be required to reboot before the USB Adaptor gets
connected and the small LED on the adapter turns from Red to Blue.
10. ●With the Speed passion USB Adapter LED now Blue, you are ready to start the Speed passion
Software. Locate and select the Speed Passion icon on your desktop.
11. Notice in the Connection box the USB is Green and the ESC is still Red.
12. You are ready to connect the Adapter to the ESC, using the Signal Wire.
13. Please note the label on the Cirtix ESC PC-USB adaptor, there are 3 color bars each marked and
indicating how to connect the Receiver wire to the adapter.
14. With the ESC connected to the Cirtix ESC PC-USB adaptor,the Speed passion Software Connection
status icons should now both be GREEN.
To Next Page
Loading...
Need help?
General