Speed Queen SLW570RAW User Manual

Speed Queen
R
Domestic WasherTechnical Information
August 2000 RT3100015 Rev. 01
120 V, 60 Hz Models
SLW570RAW PSLW570RAW
• Due to possibility of personal injury or property damage, always contact an authorized technician for servicing or
repair of this unit.
• Refer to Service Manual RS3100007 for detailed installation, operating, testing, troubleshooting, and disassembly
instructions.
• Refer to Parts Manual RP3100017 for part number information.
CAUTION
!
All safety information must be followed as provided in this Technical Sheet and in Service Manual RS3100007.
!
WARNING
To avoid risk of electrical shock, personal injury, or death, disconnect power to unit and discharge capacitor
before servicing, unless testing requires it.
Models SLW570RAW Models SLW570RAW
Power Source Wash cyles
12
Voltage AC 120 VAC
Water temperatures
4
Amperage (Single Unit) 10 A
Water level
Variable
Frequency 60 Hz
Features
Motor horsepower 1/2
Steady Spin Balance System
X
Receptacle 6-20R Self-cleaning lint filter X
Plug 6-20P Self-adjusting rear leveling legs X
Dimensions
210 Agitation stroke X
Cabinet
Tri−Action wash system
X
Height−overall
43” Fabric softener dispenser X
Height of cabinet 36” Extra rinse X
Width 27”
Motor speed
2 speed
Depth 28” Spin speed (revolutions per minute) 640 / 427 rpm
Clearance−washer lid
17 1/2”
Agitation speed
(strokes per minute)
Weight
High 69 spm
Crated 193 lbs. Medium 46 spm

Speed Queen SLW570RAW Specifications

General

Brand	Speed Queen
Model	SLW570RAW
Type	Top Load Washer
Capacity	3.2 cu. ft.
Color	White
Water Level Settings	4
Voltage	120V
Frequency	60 Hz
Depth	28 inches
Agitator	Yes
Water Temperature Settings	Cold, Warm, Hot
Cycle Options	Normal, Perm Press, Delicate, Heavy Duty, Rinse & Spin
Warranty	3 years
Height	42.75 inches

Summary

Speed Queen Domestic Washer Technical Information

Component Testing Information

Temperature Switch Testing

Measures resistance across terminals in various temperature positions.

Mixing Valve Testing

Measures the resistance of terminals on each mixing valve.

Timer Testing

Verifies input/output voltage and correct wiring connections.

Pressure Switch Testing

Measures resistance based on air pressure actuating the switch.

Lid Switch Testing

Tests continuity of the SPST lid switch in open and closed states.

Component Testing Information (Continued)

Rocker Switch Testing

Measures resistance of the rocker switch in ON and OFF positions.

Brake Pad Kit Diagnosis

Checks for proper spin stopping and brake pad noise issues.

Motor Diagnosis

Identifies motor type and directs to internal diagrams for wiring.

Drain Pump Check

Verifies the drain pump for clogs or damage, recommends replacement if needed.

Transmission Assembly

Identifies transmission type and checks for lock-up issues.

Drive Belt Information

Refers to Parts Manual for drive belt and pulley size.

Internal Motor Diagram and Schematic

Motor Switch Testing

Flowchart for testing start, high speed, and low speed motor switches.

Motor Winding Resistance

Tests resistance of start, high speed, and low speed windings.

Motor Protector Test

Checks continuity of the motor protector and common lead.

Internal Motor Diagram and Schematic (Continued)

Motor Wiring Harness

Illustration of wire harness connection block and wire colors.

Motor Schematic

Schematic showing connections for a two-speed motor assembly.

Wiring Diagram and Schematic

Connection Diagram

Detailed connection diagram for timer, switches, and motor.

Wiring Schematic Overview

Shows connections between components like mixing valve, switches, and motor.

Wiring Diagram and Schematic (Continued)

Main Schematic Diagram

Electrical schematic of the washer system including motor and controls.

Water Temperature Switch

Details the positions for hot, warm, and cold water selection.

Timer Cycle Chart

Cycle Chart Overview

Detailed chart showing timer functions and contact states per cycle step.

Timer Function Identifiers

Key for timer functions like Wash, Spin, Agitate, Rinse, Soak.

Timer Wire Positions

Mapping of timer functions to specific wire positions on the 24-pin housing.