Do you have a question about the SpeedyBee F405 V3 and is the answer not in the manual?
Processor | STM32F405 |
---|---|
OSD | Yes |
Firmware | Betaflight |
USB Port | Type-C |
Flash Memory | 16MB |
ESC Telemetry | Yes |
I2C | Yes |
LED | Yes |
Buzzer | Yes |
RSSI | Yes |
Firmware Target | SPEEDYBEEF405V3 |
Mounting | 30.5x30.5mm |
CPU Speed | 168MHz |
Built-in OSD | Yes |
Built-in Blackbox | Yes |
UART Ports | 6 |
PWM Outputs | 8 |
I2C Ports | 1 |
SPI Ports | 1 |
Dimensions | 36x36mm |
Mounting Pattern | 30.5x30.5mm |
UARTs | 6 |
ESC Protocol | DSHOT600 |
BEC Output | 5V @ 2A, 9V @ 2A |
Input Voltage | 3-6S LiPo |
9V Power Output | 2A |
BLE Bluetooth | Supported. Used for flight controller parameter configuration |
Provides a summary of the product's name, dimensions, power input, and weight.
Details the physical dimensions and mounting hole specifications for the FC and ESC stack.
Lists all the components included in the SpeedyBee F405 V3 50A 30x30 Stack package.
Explains how to connect the Flight Controller (FC) and the Electronic Speed Controller (ESC) using cables or soldering.
Identifies and describes the various ports and components on the SpeedyBee F405 V3 Flight Controller.
Details how to connect external peripherals like receivers, GPS, and VTX to the flight controller.
Guide to downloading and using the SpeedyBee app for configuring the flight controller's settings.
Provides step-by-step instructions for updating the flight controller firmware via PC.
Lists the detailed technical specifications for the SpeedyBee F405 V3 Flight Controller.
Identifies and describes the components and connection points on the SpeedyBee BLS 50A 4-in-1 ESC.
Instructions for connecting the motors and the XT60 power cable to the ESC.
Guide to configuring ESC parameters using the SpeedyBee app or the PC ESC Configurator.
Steps for updating the ESC firmware to BLHeliS or Bluejay using the ESC Configurator.
Lists the detailed technical specifications for the SpeedyBee BLS 50A 4-in-1 ESC.