15
Model Select
(System Mode)
The DX2.0 has memory for two models. This feature allows for two different models to be
operated with the same transmitter (additional receivers and servos must be purchased
separately) or one model with two different race setups.
Accessing the Model Select Function
1. Press the SCROLL and CHANNEL keys at the same time and hold.
2. Turn the transmitter power switch on to enter System Mode.
3. If “MDL” does not appear on the screen, press the SCROLL key until MDL appears.
4. Press the INCREASE or DECREASE keys to select the desired model number
(1 or 2).
5. Press the SCROLL key to access the Model Name Entry Function.
6. To exit the System Mode, either turn the transmitter power switch off or press the
SCROLL and CHANNEL keys at the same time.
MDL
I
Model Select Function
-
-
Model Number
To Next Page
Loading...
Need help?
General
