17
SPEKTRUM DX6 • TRANSMITTER INSTRUCTION MANUAL
EN
PHYSICAL TRANSMITTER ADJUSTMENTS
• Using a 1.5mm hex wrench, remove the steering wheel.
• Re-install the steering wheel.
STANDARD WHEEL CONVERSION
STEERING TENSION ADJUSTMENT
Turn the screw clockwise with a small Phillips screw driver to
increase the steering tension.
DATA PORT
The data port gives drivers access to future updates. Registering
the transmitter is neccesary for updates. Updates require the a
micro USB cable (not included, PC required).
The micro USB port is only for updates, it cannot be used to
charge the transmitter battery.