Speler SP-LED40 - Remote Control Overview

8
13. Built-in speakers
REMOTE CONTROL
1. POWER: Press to enable standby mode; press
again to turn on.
2. MUTE: To mute the sound.
3. RED button
4. GREEN button
5. BLUE button
6. YELLOW button
7. YPbPr: To switch to YPbPr mode directly.
8. CC: To switch the Closed Caption mode.
9. VGA: To switch to VGA mode directly.
10. MTS: To select desired soundtrack in TV
mode.
11. DTV STRENGTH: To display the digital signal
strength.
12. TV: To switch to TV mode directly.
13. HDMI: To switch to HDMI mode.
14. AV: To switch to AV mode.
15. CHLIST: To display the Channel List.
16. EPG: To display electronic program guide
information.
17. ASPECT: To select desired displaying mode.
18. FAV: To display the Favorite List.
19. MENU: To display the main menu. Press it
again to return to previous menu page.
20. SOURCE: To switch the input source.