EasyManua.ls Logo

Spencer Rock - General Information; Aim and Contents; Manual Conservation; Symbols Used

Spencer Rock
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
Thank you for choosing a Spencer product
1. GENERAL INFORMATION
1.1 Aim and contents
The aim of this manual is to supply all the information necessary so that the client, will not only
attain adequate use of the appliance, he will also be capable of using the instrument in the most
autonomous and secure way possible. This includes information regarding technical aspects,
functioning, maintenance, spare parts and safety.
1.2 Conservation of the instruction and maintenance manual
The instruction and maintenance manual must be kept together with the product, for the whole life
of the device, inside a dedicated container and above all, away from any substances or liquids which
could compromise perfect legibility.
1.3 Symbols used
Symbol Meaning
General or specific warnings
See instructions for use
Lot number
Product code
The product is compliant with the specifications of the Directive 93/42/CEE
1.4 Servicing request
For any information regarding the correct interpretation of the instruction manual, the use,
maintenance, installation and restore of the product, please contact the Spencer Customer Care
Service tel. 0039 0521 541111, fax 0039 0521 541222, e-mail info@spencer.it or write to Spencer
Italia S.r.l. Via Provinciale, 12 - 43038 Sala Baganza (Parma) - ITALY. In order to facilitate the
assistance service, please always indicate the lot number (LOT) shown on the label applied on the
box or on the device.
1.5 Demolition
When the devices are no more suitable for being used, if they haven’t been contaminated by any
particular agents, they can be disposed of as normal solid waste, otherwise follow the current
regulations about demolition in each country.
1.6 Labelling
Each device has got an identifying label, positioned on the device itself and/or on the box. This label
includes information about the manufacturer, the product, the CE mark, the lot number (LOT). It
must never be removed or covered.
2. WARNINGS
2.1 General warnings
The product must be used by trained personnel only, having attended specific training for this
device and not for similar products.
Training routines must be registered on a special register in which the names of those trained, of
the trainers, date and place are indicated. This register which will certify the eligibility of the
operators to use the Spencer device has to be kept for a period of 10 years after the disposal of
the device itself. This register will be made available to the competent authorities and/or
manufacturer if requested.
Spencer Italia S.r.l. is always at your disposal to plan trainings on products.
Before carrying out any kind of operation on the appliance (training, installation, use), the
operator must carefully read the enclosed instructions, paying particular attention to the correct
safety precautions and to the procedures to be followed for installation and for correct use.
If the instructions belong to another device and not to the device received, inform the
manufacturer immediately and avoid use of the device.
In case of any doubts about the correct interpretation of the instructions, please contact Spencer
Italia S.r.l. for any necessary clarifications.

Related product manuals