5
SET UP
Battery Installation
This meter uses six AAA batteries. To install the batteries
before rst use:
1. Unscrew the two screws on the back of the meter. These
screws secure the battery cover.
2. Remove the battery cover.
3. Insert six new AAA batteries, ensuring correct polarity.
4. Replace the battery cover and reinstall the screws.
Replace the batteries when the low-battery icon blinks on
the LCD.
Note…
Before replacing the batteries, turn the meter o.
Meter On and O
1. Press POWER to turn the meter on/o
2. The meter will automatically turn o after ten minutes
of inactivity.
To Next Page
