SPERONI SP-SX - User Manual

Elettropompe sommerse 4”- 6”
4”- 6” Electrosubmersible pumps
Électropompes immergées 4”- 6”
Electrobombas sumergidas 4”- 6”
SP-SX
 Libretto istruzione
 Operating instructions
 Mode d’emploi
 Instrucciones de uso

Summary

Standard Use and Initial Setup

First Control Checks

Perform initial checks on the well and motor rotation before operation.

Motor and Pump Coupling

Instructions for correctly coupling the motor to the pump and ensuring free rotation.

Electrical Cable Connection

Guidance for safely and properly connecting the motor's electrical cable.

Pump Installation Guidelines

Procedures for the physical installation of the pump, including piping and anchoring.

Electrical Connection and Operation

Electrical Connection Requirements

Details on connecting the feeding cable and control panel with necessary protections.

First Running Procedure

Steps for initial pump startup, including gate operation and pressure gauge checks.

Standard Running and Checks

Guidance for normal operation, hydraulic connections, and ongoing system checks.

Maintenance and Safety Precautions

Information on regular maintenance, safety during interventions, and general warnings.

Disposal of Electric and Electronic Equipment

WEEE Directive Compliance

Information on the proper disposal of electrical and electronic equipment per WEEE directive.

SPERONI SP-SX Specifications

General

Type	Self-priming centrifugal pump
Liquid Type	Clean Water
Power	0.75 kW
Frequency	50 Hz
Family	SP-SX
Voltage	230 V
Inlet/Outlet Size	1 inch
Material	Cast iron