8000M Mixer/Mill
Page 17 of 27 SPEX SamplePrep LLC January 2010
7.0 ACCESSORIES: GRINDING/MIXING VIALS (Cont’d)
8005 Zirconia Ceramic Vial Set
Vial size 2 1/2 in. diameter x 2 11/16 in. Solid zirconia ceramic
vial, cap, and two 1/2 in. balls; seven corprene gaskets.
Grinding load approximately 2-8ml; mixing load
approximately 20ml.
8007 Stainless Steel Vial Set
Vial size 2 1/4 in. diameter x 3 in. Vial body and cap liner
made of hardened 440C stainless steel. Two 1/2 in. and
four 1/4 in. stainless steel balls are included. Set
includes screw-on cap with O-ring to permit wet or dry
grinding/mixing. Grinding load 3–10 ml; mixing load
approx. 25 ml.
8008 Silicon Nitride Vial Set
Vial size 2 1/2 in. diameter x 2 11/16 in. solid silicon
nitride vial, cap, and two 1/2 in. balls; seven corprene
gaskets. Grinding load approximately 2-8ml; mixing load
approximately 20ml.
8009 Round-Ended Hardened Steel Vial Set
Vial size 2 3/8 in. diameter x 3 in. Hardened steel vial
body has grinding chamber with rounded ends for more
efficient grinding/mixing. Includes screw-on cap and O-
ring for wet or dry use, two 1/2 in. and four 1/4 in. steel
balls. Grinding load 3-10ml; mixing load approximately
25ml.
To Next Page
Loading...