8000M Mixer/Mill
Page 18 of 27 SPEX SamplePrep LLC January 2010
7.0 ACCESSORIES: GRINDING/MIXING VIALS (Cont’d)
8014 Agate Vial Set
For dry grinding and mixing. Vial size 2 1/4 in. diameter x
2 3/4 in. All-agate vial body, two slip-on caps, two 1/2 in.
agate balls, and eight corprene gaskets. Grinding load 3-
8ml; mixing load approximately 20ml.
8006 Methacrylate Vial Set
2 1/4 in. diameter x 2 5/8 in. Vial body of heavy-gauge
methacrylate with methacrylate-lined aluminum screw-
on cap. Set includes corprene gasket, two 8006A (1/2
in.) and four 3112 (3/8) in. plastic balls. Allows grinding
of soft materials without metallic contamination.
3114 Stainless Steel Vial Set
1/2 in. diameter x 1 in. long. Made of 303 stainless steel;
includes slip-on cap and 1/4 in. steel ball; grinding load
0.2-0.6 ml, mixing load 1ml.
3117 Hardened Tool Steel Vial Set
1/2 in. diameter x 1 in. long. Made of Worpliss tool
steel. Includes slip-on cap and 1/4 in. steel ball. Grinding
load 0.2-0.6ml, mixing load 1ml.
To Next Page
Loading...