Spherificator IMP-SPH - Technical Procedures; Disassembling Your Spherificator

Remove top and bottom covers
Remove the two silicon rings
from the bottom and from the
top
Pinch the middle of the
Sphericator along the
separation line until an
opening is made. Using a flat
screwdriver or a butter knife
pry open the Sphericator in
two – this should be relatively
easy to do



22 SPHERIFICATOR DISASSEMBLY
DISASSEMBLING YOUR SPHERIFICATOR
At this point you will see the interior of the Sphericator and you will
have 4 parts: the front and back of the Sphericator, the top cone and
the bottom nozzle