25
2.1 TECHNICAL CHARACTERISTICS
Compressor: Hermetic with automatic oil reintegration
Power: 250 watt
Recovery capacity (liquid phase): 400 gr/min
Vacuum pump: One-step
Capacity: 100lt/min
Vacuum grad: 7x10
Vacuum test:
Automatic with sound alarm sound, message on the display and
visualization of the vacuum level in mbar
Deposit bottle: With heater –
two containers and security valve (in compliance with
directive 97/23/CE)
Capacity of freon:
22 Kg 32 bar (according to directive 97/23/CE) CE/
TÜV
LCD display 5,5”
Low and high pressure gauges Digital and analogue indication
Cylinder pressure gauge Digital
Cylinder scale accuracy: ± 2gr
Cylinder weight resolution 1gr
Incondensable gas discharge Automatic
Cylinder high pressure alarm With automatic stop of the compressor
Current Supply: 230 V / 50 Hz
Loudness:
under 70dB (measured with sound level meter class 2 according to
standards IEC 651 and IEC 804)
Tube length: 3 mt each
Measurements of the devices: 500 x 500 x h 1310 mm
Weight: 80 Kg
24-column printer
1.2 INCLUDED ACCESSORIES
nr. 1 Low pressure hose l = 3mt
nr.1 High pressure hose l = 3 mt
nr.1 Low pressure quick coupling
nr.1 High pressure quick coupling
nr.1 Plastic bottle of 250 gr for fresh oil filling
nr.1 Plastic bottle of 250 gr for tracer injection
nr.1 Plastic bottles of 250 gr for old oil discharge
nr.1 Power supply cable
CHAP. 2 - TECHNICAL SPECIFICATIONS
Fig.3
Enclosed Accessories
Fig.2
To Next Page
Loading...