Installing or Replacing the Battery
If you need to install or replace your battery you can do so by opening the
battery cage. To access the battery cage please follow these steps:
1. Remove wheel that covers the access panel to the battery cage.
2. Unscrew the four screws of the access panel.
3. Connect the battery to the terminals inside the battery cage - connect
the red wire to the red terminal and the black wire to the black terminal
4. Insert the battery into the battery cage.
Transporting and Storage
Remove all balls and close the ball hopper aps before transporting your
tennis ball machine. Store the machine in a clean, dry location.
Never store the machine in a vehicle where temperatures can be very high.
Extreme temperatures and conditions can affect the machine’s electronic
board and battery.
Never store the machine outside in cold or wet weather. Exposure to rain
and snow will shorten the life of the machine.
Static Electricity
It is possible that the action of the tennis balls rubbing against the throwing
wheels will cause a small static electric shock when you touch the control
panel. Machines have been tted with a small chain on the underside of the
base to ground the machine and eliminate this issue.
6
To Next Page
Loading...
