6
2. Specific product safety information
The following information is specific to FV type flash vessels and should be read in
conjunction with the 'Safety information', Section 1
2.1 Overpressure protection
Flash vessels must be protected against overpressure situations and provision is
made for fitting a safety valve. However, it should not be assumed that the safety
valve will be the same size as the connection. Safety valve sizing must be in accordance
with National Standards. A connection is also provided for a pressure gauge. Safety
valves and pressure gauges are both available from Spirax Sarco.
Warning
If this product is not used in the manner specified by this IMI, then the
protection provided may be impaired.
To Next Page
Loading...
