IM-P505-02-US Issue 1
73
UTM20 Series Ultrasonic Transit-time Flowmeters
10.23 Reset Menu
Reset Submenus Options/Descriptions
RESET FLOW TOTAL Reset the FLOW TOTAL See the "Reset Flow Totalizer Procedure" below
UNLATCH ALARMS
Only available if alarm latch is enabled Unlatches output if alarm condition
occurred and cleared See “Setup > Inputs/Output > Output #1 (or Output #2 or
Output #3)” on page 57.
Reset Flow Totalizer Procedure
The flow meter accumulates the amount of flow passing through the meter into a flow totalizer To
reset the flow total:
1 Press MENU/BACK
2 Select RESET from the Main Menu (Press DOWN to scroll through the list of options When RESET
is the top item, press ENTER )
3 Select RESET FLOW TOTAL from the Reset menu (With RESET FLOW TOTAL as the top item,
press ENTER )
4 Select OK to confirm reset
After selecting RESET FLOW TOTAL, you are prompted to confirm the reset of the flow total Press
ENTER to confirm or press MENU/BACK to cancel
To Next Page
Loading...
