Need help?Do you have a question about the Spirax Sarco VLM30 and is the answer not in the manual?
General| Power supply | 24 V DC |
|---|---|
| Material | Stainless Steel |
| Sizes | DN15 |
| Process connection | Flanged |
| Output | 4-20 mA |
| Pressure Rating | PN16 |
Defines the intended application and suitability of the flowmeter for its use.
Ensures safe access, working platforms, and adequate lighting during maintenance.
Considers hazards from pipeline contents and the surrounding operational environment.
Addresses system-wide effects of actions and safe isolation of pressure systems.
Recommends suitable tools, parts, clothing, and permit-to-work systems.
Provides guidance on safe manual handling and warns of residual hazards like hot surfaces.
Covers inspection for transport damage, safe storage practices, and proper disposal.
Explains the Karman street principle behind vortex shedding flow measurement.
Details the information found on the product's nameplate.
Outlines general conditions, inlet/outlet sections for installing the vortex meter.
Illustrates sensor orientation for high temperatures and points for external compensation.
Covers critical points for sensor installation, torque, gasket use, and wafer type centering.
Explains how to adjust the transmitter position and rotate the LCD indicator.
Details signal cables, connection techniques, and the importance of proper grounding.
Covers terminal connections and power supply for HART and Modbus communication.
Provides guidelines for connecting the sensor to the transmitter in remote mount configurations.
Warns about hazards and outlines the general commissioning process.
Lists essential checks before powering up and describes the power supply sequence.
Explains checking/configuring basic settings and parameterization via the 'Easy Setup' menu.
Covers hardware settings and configuration for HART and Modbus communication.
Warns about hazards and explains account access and password settings.
Details how to navigate the device's menu structure and understand menu levels.
Explains the LCD process display and how to access/change device parameters.
Details specific parameters and explains zero point balancing procedures.
Describes optional advanced filters and basic diagnostic functions.
Warns about live parts, hot media, and ESD damage during maintenance.
Provides guidance on cleaning the meter exterior and annual sensor checks.
Guides on general troubleshooting, error interpretation, and transmitter checks.
Lists error codes, their text, causes, remedies, and output responses.
Details replacing components and transferring system data using DIP switches.
Provides safety warnings and steps for safely removing the device from the pipeline.
Lists available spare parts for the transmitter, base, sensor, and remote mount assemblies.
Provides tables with Reynolds numbers and Qmax values for liquids and gases/steam.
Shows compliance with EU harmonisation legislation and relevant standards.
To Next Page
