Spirax Sarco VLM30 User Manual

IM-P736-02 EMM Issue 3
19
VLM30 In-Line Vortex Flowmeter
3. Installation
Warning!
Risk of injury due to device slipping.
- The device's center of gravity may be higher than the harness suspension points.
- Make sure that the device does not slip or turn during transport.
- Support the device laterally during transport.
Warning!
Risk of injury due to live parts!
When the housing is open, contact protection is not provided
and EMC protection is limited.
- Before opening the housing, switch o󰀨 the power supply.
Caution!
Risk of burns due to hot measuring media
The device surface temperature may exceed 70 °C (158 °F), depending on the measuring
medium temperature!
- Before starting work on the device, make sure that it has cooled su󰀩ciently.
Damage to components!
The electronic components of the printed circuit board can be damaged by static
electricity (observe ESD guidelines).
- Make sure that the static electricity in your body is discharged before touching electronic
components.

Spirax Sarco VLM30 Specifications

General

Brand	Spirax Sarco
Model	VLM30
Category	Measuring Instruments
Language	English