Spirent C1 - Active Version Display

Spirent C1 and C2 Installation Instructions
Appliance Firmware Support
Spirent C1 and C2 Installation Instructions | 31
PN 71-008959 Rev A April 2020
The admin prompt shows Active Version as shown in the screen capture below.
Notes: • Downgrading to a Spirent TestCenter version below 5.07 removes this
feature.
• Spirent TestCenter versions below 5.07 do not support AutoFallBack.
To see the available Spirent TestCenter versions using the command line interface:
1 SSH to Spirent TestCenter as an admin.
2 Use the applicable command
•Type version to identify the active Spirent TestCenter version.