8
DrumXchanger Analog Code
®
Plug-in
Introduction
Features
• Phase-accurate processing
• Free sample mixing
• Ducking function for the original signal
• High and low pass filter on each module
• Transient Designer on both the original and the sample module
• Dynamic control to adjust the sample’s loudness
• Real-time +/- one octave pitch sifting
• Delay control for precise replacement
Applications
The DrumXchanger can be used in mixing applications to process
single drum tracks. You can optimize drum elements that are
typically recorded with close microphone techniques: snare, bass
drum and toms.
The DrumXchanger was not conceived to replace hi-hats and cym-
bals, nor drum sounds in a finished mix down.
To Next Page
Loading...