5.
Put one person inside the pool to hold the wall at the Top Rail.
Insert the Connecting Pins (G), to connect the pool
straps to the Stainless Steel Rings. Repeat this process with all four walls.
Note: At this stage, all four walls will be leaning inward; this is normal. They will automatically move to their
proper positions once the pool is filled with water.
6. Gently pull buttress straps away from the center of the pool to insure a wrinkle-free installation.
WARNING: Shallow water! Never jump or dive into a
Splash SuperPool; serious bodily injury could occur.
7. Position the short wall Top Rails so they are leaning over and on top of the long wall Top Rails.
8
©
2003-Splash Superpools Ltd.
To Next Page
Loading...