SPORTSPOWER 12x8FT Rectangular Trampoline - Page 16

12
STEP 2
 First assemble the leg pieces by connecting Part 5 to each side of Parts 6-1 and 6-2. DO NOT FULLY TIGHTEN
THE SCREWS AT THIS STAGE TO ALLOW ROOM FOR ADJUSTMENT OF THE TRAMPOLINE FRAME DURING
ASSEMBLY.
 Next, connect the assembled leg pieces to Part 1 and Part 2 as shown below.
IMPORTANT: MAKE SURE TO FULLY TIGHTEN ALL SCREWS AFTER THE ENTIRE
TRAMPOLINE FRAME IS ASSEMBLED IN STEP 3.
5
1
1
1
5
5
5
6-1
6-2
6-1
6-2
5
5
5
5
5
2
2
DO NOT PLACE HANDS NEAR THE
OPENING WHEN CONNECTING THE
TUBES. WEAR PROTECTIVE GLOVES TO
PROTECT FROM INJURIES DURING
ASSEMBLY.