SPORTSPOWER 12x8FT Rectangular Trampoline - Page 17

13
STEP 3
 Insert Parts 3 and Parts 4 into the corners of the frame.
NOTE: The same part numbers need to be placed diagonally opposite each other, otherwise the frame cannot be
assembled properly.
 Secure all leg tubes (Part 5) to the frame as shown in the enlarged diagram.
IMPORTANT:
ONCE THE TRAMPOLINE FRAMES IS ASSEMBLED, FULLY TIGHTEN ALL THE SCREWS.
1
1
3
5
5
5
5
5
5
5
5
3
4
4
2
2
DO NOT PLACE HANDS NEAR THE
OPENING WHEN CONNECTING
THE TUBES. WEAR PROTECTIVE
GLOVES TO PROTECT FROM
INJURIES DURING ASSEMBLY.