Option 1: Hardware Detection for Windows 2000 and
Windows Me
1. After inserting your PCS Connection Card into the PC Card slot, you will
see a series of hardware detection notices.
2. Windows 2000 only: Please disregard the “Digital Signature Not
Found” warning and click
Yes to proceed with installation.
3. After the software and driver installations are complete, the software
will detect the characteristics of the card. If your PCS Connection Card
has not been activated, the Activation Wizard will automatically
launch and guide you through the activation process.
Go to Part 3:
Activating and Provisioning Your PCS Connection Card,
starting
on page 26
.
Section 2: Installing the PCS Connection Card
2B: Installing Your PCS Connection Manager Software and PCS Connection Card
21
Part 2: Driver Installation
To Next Page
Loading...