4. Steps 1-3 will repeat three times.
Note: Windows XP only: A FOUND NEW HARDWARE WIZARD may appear
asking to select a USB Root Hub.
4.a.Click Nextto continue, accepting the already highlighted default
USB Root HUB."
5. After the software and driver installations are complete, the software
will detect the chracteristics of the card. If your PCS Connection Card
has not been activated, the Activation Wizard will automatically
launch and guide you through the activation process.
Go to Part 3:
Activating and Provisioning Your PCS Connection Card,
beginning on page 26.
Section 2: Installing the PCS Connection Card
2B: Installing Your PCS Connection Manager Software and PCS Connection Card
25
Part 2: Driver Installation
To Next Page
Loading...