EasyManua.ls Logo

SPT SD-65E - FEATURES; TECHNICAL SPECIFICATIONS; INSTALLATION

SPT SD-65E
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Bucket Full Light: Illuminates when bucket is ready to be emptied, or when the bucket is removed or
not replaced in proper position
Auto Shut-Off: The water level control switch shuts off the unit when the bucket is full, or when the
bucket is removed or not replaced in proper position. When the set humidity is reached, unit will also
shut off automatically
Auto Defrost: When frost collects on the evaporator coils, compressor will cycle off and fan will
continue to run until frost disappears.
Auto-Restart Function: When there is power failure, unit will restore to previous function setting and
restart when power returns.
MODEL
Dehumidifying Capacity
Power Supply
Current
Power Consumption
Working Environment
Water Tank Volume
Net Weight
Dimension
SD-30E SD-40E SD-65E
30 pints per day 40 pints per day 65 pints per day
115V / 60Hz
4.3A 5.4A 6.7A
420W 525W 710W
41 ~ 95°F
25% RH and above
5L / 11 pints
301bs
15-4/16xl 1-11/16x21 in.
SD-70E
70 pints per day
7.5A
810W
10 L/21 pints
45.21bs
18x15x26 in.
** Capacity will vary according to actual room ambient temperature and humidity conditions.
Place the dehumidifier on a flat surface and in a location where the air inlets and outlets will not
be obstructed. Do not install underneath desks or inside cupboards, as this will restrict the
airflow. Keep unit at least 40 inches away from televisions and radios as the unit may disrupt the
image or sound. Maintain a minimum clearance of 20cm (7.5in.) around the unit and 40cm
(16in.) above the unit.
4%m or
Air _u!Jet#_il:÷
20cm or m_o_
20On or m/ore

Related product manuals