SPX FLOW TWHC3 User Manual

© SPX FLOW, Inc.
Form No. 1000623
Rev. 6 Jan. 10, 2017
Performance Specications
Technical Specications
The following technical data is applicable to all TWHC hydraulic torque wrenches:
MAXIMUM PRESSURE: Advance - 690 bar (10,000 psi)
Retract - 103 bar (1,500 psi)
OPERATING TEMPERATURE LIMITS: -20°C to +40°C (-4°F to 104°F)
HYDRAULIC OIL TYPE: Grade 46 hydraulic oil
Wrench Ref Square Drive, mm (in.) Torque Output, ft-lb Approximate
Weight, kg (lb)
MIN** MAX
TWHC1 19.05 (3/4) 170 1,413 2.8 (6.2)
TWHC3 25.4 (1) 376 3,136 5.3 (11.7)
TWHC6 38.1 (1 1/2) 726 6,050 8.8 (19.4)
TWHC50 63.5 (2 1/2) 6360 53000 69.0 (152.0)
** Note that minimum torque can be lower depending upon pump low-pressure capability

SPX FLOW TWHC3 Specifications

General

Brand	SPX FLOW
Model	TWHC3
Category	Power Tool
Language	English