SPX POWER TEAM PH1002 User Manual

PORTABLE PULLER
100 Ton Capacity
Form No. 102472
Litho in USA
PH1002
PH1002J
Sheet No. 1 of 4
Rev. Date: 25 May 1994
Assembly &
Operating Instructions
for:
These instructions must be read and carefully followed. Most problems with new equipment are caused by incorrect
assembly, operation, or installation. Carefully inspect all parts upon arrival. The carrier, not the manufacturer, is
responsible for any damage resulting from shipment.
NOTE:
• Flame Out 220
TM
fire-resistant hydraulic fluid is compatible with all Power Team hydraulic equipment. This
fluid, which is available through your local Power Team distributor, does not require changing the seals in
any Power Team pump or ram.
Tech. Services: (800) 477-8326
Fax: (800) 765-8326
Order Entry: (800) 541-1418
Fax: (800) 288-7031
SPX Corporation
5885 11th Street
Rockford, IL 61109-3699 USA
Internet Address:
http://www.powerteam.com
®

SPX POWER TEAM PH1002 Specifications

General

Brand	SPX POWER TEAM
Model	PH1002
Category	Industrial Equipment
Language	English

Summary

Safety Precautions

Hydraulic Hose Safety

Safety guidelines for hydraulic hoses, including connections, rupture, and material compatibility.

Pump Operation Safety

Precautions for pump operation, pressure limits, and reservoir maintenance to prevent injury.

Puller Setup and Operation Safety

Safety instructions for puller setup, alignment, jaw contact, and operating limits.

Assembly Procedures

Cart and Base Assembly

Assemble the main cart, legs, wheels, dolly, pump, and hydraulic connections.

Head, Ram, and Handle Assembly

Assemble the puller head, ram, handle, internal blocks, and spring mechanism.

Final Puller Integration

Attach the assembled puller head to the cart upright and install the ram adapter.

Operating Instructions

Vertical Setup and Alignment

Guide for positioning and aligning the puller head for vertical operation, ensuring proper centerline contact.

Horizontal Setup and Jaw Adjustment

Instructions for horizontal setup, including jaw/arm angle adjustment and contact for safe operation.

Accessory and Safety Procedures

Guidelines for using extension adapters, safety chains, and lifting the heavy puller assembly.

General Maintenance