8
© SPX
Form No. 1000572
Rev. 0 February 8, 2012
or seal damage will result and can lead to unsafe operating conditions.
IMPORTANT
• Keep the cylinder clean at all times.
• While at a job site, when the cylinder is not in use, keep the piston rod fully retracted
and upside down.
• Always use protective covers on disconnected quick couplers.
• When mounting cylinders or rams using the internal piston rod threads, collar threads,
threaded tie rods or base mounting holes, the threads must be fully engaged. Always
use SAE grade 8 or better fasteners when attaching components to cylinders or rams
and tighten securely.
• Limiting the stroke and pressure on all cylinders will prolong their life.
Safety Precautions continued
To Next Page
Loading...
Need help?
General
