SPX RADIODETECTION RD7200 - Page 12

© 2022 Radiodetection Ltd 11
BATT
Set battery type: Alkaline, NiMH or Li-
Ion
ARROW
Select NULL or proportional Guidance
(GUIDE) arrows in Peak+ mode
COMPA
Enable or disable display of the
Compass feature.
VALRT:
Enable or disable vibrating handle
warnings.
AUDIO
Set audio tone frequency level high or
low
SWING
Enable or disable swing warning
INFO
Run a Self-Test, show the locator
software version and revision, display
the date of the most recent service
recalibration (CAL) or the most recent
eCert calibration (ECERT)
Table 3.1 Locator menu options
Navigating the transmitter menu
1 Press the key to enter the menu
2 Use the or keys to scroll through the menu
options
3 Press the key to enter the option’s submenu.
4 Use the or keys to scroll through the
submenu options
5 Press the key to confirm selection and return to
the previous level or exit the menu
6 Press the key to return to the main operation
screen
Transmitter menu options
VOL
Adjust the speaker volume from 0
(mute) to 3 (loudest)
FREQ
Enable or disable individual frequencies
BOOST
Boost transmitter output for a specified
period of time (in minutes)
LANG
Select menu language
OPT F
Run SideStepauto™ to auto-select a
locate frequency for the connected
utility
BATT
Set battery type: Alkaline, NiMH or Li-
Ion. Select Eco mode (alkaline batteries
only)
MAX P
Set the transmitter to output its
maximum wattage.
MODEL
Match the transmitter setting to the
model of your locator (see Appendices
for a list of all available models)
MAX V
Set the output voltage to maximum
(90V)
INFO
Show the transmitter software version
and revision
Table 3.2 Transmitter menu options