© 2022 Radiodetection Ltd 16
Refer to the locator and transmitter menu options
(tables 3.1 and 3.2) for more information.
NOTE: These procedures refer to both the transmitter
and locator unless stated otherwise.
Before changing settings, ensure the locator or
transmitter is switched on by pressing the key for two
seconds.
Language
The locator and transmitter support a number of
languages. You can specify your preferred language
using the menu system.
To select your preferred menu language:
1 Press the key to enter the menu
2 Scroll to the LANG menu using the or keys
3 Press the key (on the locator) or the key (on
the transmitter) to enter the LANG menu
4 Scroll through the language options using the or
keys
5 Press the key to accept your selection and return
to the main menu.
6 Press the key to return to the main operation
screen.
Battery type
RD7200 locators and transmitters support Lithium-Ion,
Alkaline or Nickel Metal Hydride batteries.
You should set the Locator and transmitter battery type
to match the currently installed type. This is to ensure
optimal performance and correct battery level indication.
Lithium-Ion batteries will automatically be detected by
the locator
To set your battery type:
1 Press the key to enter the menu
2 Scroll to the BATT menu using the or arrows
3 Press the key (on the locator) or the key (on
the transmitter) to enter the BATT menu
4 Scroll through the battery options using the the
or keys.
5 Press the key to accept your selection and return
to the main menu
6 Press the key to return to the main operation
screen
7 If you are using the optional Li-Ion battery pack, the
locator will automatically select the correct battery
type.
Power network frequency
Select the correct frequency (50 or 60Hz) for your
country or region’s power supply on your locator.
To change power frequency on the locator:
1 Press the key to enter the menu
2 Scroll to the POWER menu using the or keys
3 Press the ke
y to enter the POWER menu
4 Scroll through the power options using the or
keys
5 Press the key to accept your selection and return
to the main menu
6 Press the key to return to the main operation
screen
Measurement units
The RD7200 locator allows you to work in Metric or
Imperial (US customary) units.
To select your preferred units:
1 Press the key to enter the menu
2 Scroll to the UNITS option using the or keys
3 Press the key to enter the UNIT menu
4 Scroll through the measurement options using the
or keys to select METRE (for metric) or IMP
(for imperial) units
5 Press the key to accept your selection and return
to the main menu
6 Press the key to return to the main operation
screen
Enabling / disabling frequencies
The locator and transmitter support a wide range of
frequencies and there may be times when some of these
frequencies are not used. It is possible to quickly enable
or disable frequencies using the menu system.
To enable or disable frequencies:
1 Press the key to enter the menu
2 Scroll to the FREQ menu using the or keys
3 Press the key (on the locator) or the key (on
the transmitter) to enter the FREQ menu
4 Scroll through the frequency options using the or
keys
5 Press the key (on the locator) or the key (on
the transmitter) to enter the frequency
6 Scroll to OFF or ON using the or keys
To Next Page
Loading...