Need help?Do you have a question about the SPX Radiodetection Tx-5 and is the answer not in the manual?
General| Brand | SPX |
|---|---|
| Model | Radiodetection Tx-5 |
| Category | Security Sensors |
| Language | English |
Contains critical safety warnings and precautions for operating the RD8100 locator and transmitter.
Details the short and long press actions for each key on the locator.
Details the short and long press actions for each key on the transmitter.
Details various menu settings for the locator, including volume, data, Bluetooth, and GPS.
Details menu settings for the transmitter, including volume, frequency, and boost output.
Detailed steps for performing a Self-Test on the RD8100 locator to check circuit integrity.
How to connect the transmitter directly to a pipe or cable for signal application.
How to use induction mode to apply a signal to buried conductors without direct contact.
Explains passive frequency detection using Power, Radio, CPS, and CATV signals.
Details the 5 different locate modes available on the RD8100: Peak, Peak+, Guidance, Broad Peak, Null.
Information on measuring utility depth, signal current, and relative orientation.
Explains how to use the CD signal and clamp/stethoscope for identifying specific utilities.
Overview of RD Manager software for managing, customizing, and upgrading the RD8100.
Explains the Bluetooth capability for connecting to transmitters, PCs, laptops, and handheld devices.
Steps to initiate and complete Bluetooth pairing between the RD8100 locator and a PDA or PC.
How to record, save survey measurements to internal memory and transfer via Bluetooth.
Explains iLOC for remote transmitter control of frequency, power, and SideStep via Bluetooth.
How to remotely change the transmitter's output frequency using the locator via iLOC.
How to remotely adjust transmitter power output, standby, and boost modes using iLOC.
To Next Page
