Need help?Do you have a question about the SPX Radiodetection RD8200 and is the answer not in the manual?
General| Brand | SPX |
|---|---|
| Model | Radiodetection RD8200 |
| Category | Security Sensors |
| Language | English |
Details general guidelines and critical safety information for operating the RD8200 locator.
Information on battery types, usage, charging, and maintenance for the RD8200 system.
Details regulatory compliance statements, including FCC and Industry Canada information.
Provides an overview of the manual's purpose and target audience for the RD8200 system.
Introduces the RD8200 locator and transmitter family, highlighting its design and capabilities.
Explains how to extend the standard warranty for RD8200 locators and transmitters.
Details the structure and content of each section within the RD8200 operation manual.
Crucial safety warnings and precautions for operating the RD8200 locator and transmitter.
Details the RD8200 locator's features, keypad, and screen icons for operation.
Details the transmitter features, keypad, and screen icons for operation.
Guides on navigating and using the menu system on both locator and transmitter.
Covers initial setup, including power options, inserting, removing, and charging batteries.
Instructions for turning the RD8200 locator and transmitter on and off.
Details keypad functions and shortcuts for both the locator and transmitter.
Explains the five different antenna modes for cable and pipe locating.
Guides on configuring system settings like language, battery type, and frequencies.
Describes the Dynamic Overload Protection (DOP) feature for accurate locating in noisy environments.
Explains the automatic depth measurement feature for buried cables and pipes.
Details the StrikeAlert feature for detecting shallow utilities and providing warnings.
Explains the Swing Warning system to alert users of improper locator orientation.
Details the Bluetooth module and its use for connecting to compatible devices.
Introduces iLOC for remote transmitter control and SideStep for frequency adjustment.
Covers adjusting transmitter power output and using the Boost function.
Explains the Measure mode for taking impedance and voltage readings.
Details how to select and manage utility types for accurate surveys.
Covers the locator's GPS capabilities for location data logging and mapping.
Details available active and passive frequencies and methods for signal application.
Guidance on selecting optimal frequencies for effective cable and pipe tracing.
Explains the five antenna modes: Peak, Peak+, Guidance, Broad Peak, and Null.
Describes the procedure for accurately pinpointing the location of a target line.
Covers techniques for scanning areas to locate unknown buried lines.
Explains advanced techniques for isolating signals in congested areas.
Details the automatic depth measurement feature and its integration with the compass.
Provides methods for checking the accuracy of depth readings obtained by the locator.
Explains how current measurements help identify utilities and assess their condition.
Covers techniques for locating specific utilities, including induction and signal coupling management.
Guides on establishing effective signal and ground connections for accurate tracing.
Explains the double-ended connection method for positive utility identification.
Introduces fault-finding concepts, signals, and required equipment for locating cable faults.
Details preparation steps for fault finding, including transmitter connection and reference readings.
Provides a step-by-step guide on locating cable sheath and insulation faults.
Explains the Current Direction feature for positively identifying target lines and flow direction.
Details the procedure for resetting the Current Direction feature for accurate operation.
Instructions on how to save survey measurements to the RD8200 locator's internal memory.
Guides on pairing the RD8200 locator with an Android device via Bluetooth.
Explains how to transmit survey data wirelessly from the locator to a paired device.
Provides solutions for common issues, including connection problems and error codes.
Steps to enable the iLOC function for remote transmitter control via Bluetooth.
Procedure for pairing the RD8200 locator with an iLOC-enabled transmitter.
Addresses issues with iLOC wireless communication, including resetting connections.
Details how to remotely adjust transmitter frequencies and power output using iLOC.
Explains the SideStep feature for adjusting locate frequency to overcome interference.
Overview of accessories compatible with the RD8200 system and their functionality.
Information on the optional headphone set for the RD8200 locator.
Details locator clamp usage, connection, and range for cable identification.
Explains transmitter clamps for safely applying signals to pipes or cables.
Introduction to sondes for tracing pipes, ducts, and sewers, including selection and usage.
Details stethoscope usage and types for cable identification in congested areas.
Information on the submersible antenna for underwater tracing of pipes and cables.
Covers the mount for holding mobile devices alongside the locator for data viewing.
Guidelines for maintaining the RD8200 locator and transmitter for longevity.
Details the self-test feature for checking locator circuitry accuracy and performance.
Information on the RD Manager Online PC companion software for customization and updates.
Covers the standard and extended warranty policies for RD8200 products.
Instructions on how to check for and upgrade the RD8200 locator and transmitter software.
Explains the eCert feature for calibrating and testing the locator's performance.
Information on time and date error messages and how to resolve them.
To Next Page
