© 2021 Radiodetection Ltd 40
Section 11 - iLOC™
iLOC is a standard feature of all RD8200 locator models. iLOC lets you control the TX-10B Bluetooth transmitter
remotely using your locator. With iLOC you can adjust the output frequency, power settings and use SideStep. iLOC
commands are sent over a Bluetooth module that can operate at distances of up to 450m / 1400ft in direct line of
sight.
To use iLOC, the transmitter and locator must be paired using the procedure described in Section 5.3.
NOTE: The RD8200 locator wireless features may be
subject to national and or local regulations. Consult your
local authorities for more information.
NOTE: Operating in built up areas and in areas with high
electromagnetic interference may reduce iLOC’s
performance.
WARNING! Do not attempt any wireless connection in
areas where such technology is considered hazardous.
This may include: petrochemical facilities, medical facilities
or around navigation equipment.
11.1 Switching iLOC On
By default RD8200 locators and Bluetooth enabled
transmitters are shipped with the iLOC function disabled.
To switch iLOC On:
1 Press the key to enter the menu
2 Scroll to the iLOC menu using the or keys
3 Press the key (locator) or the key (transmitter)
to enter the iLOC menu
4 Scroll up or down to the ON option
5 Press the key to switch Bluetooth ON and return
to the previous menu
11.2 Switching Bluetooth off
You can switch Bluetooth off to prolong battery life or
comply with regulations in areas where wireless
communications are considered hazardous.
To switch Bluetooth off:
1 Press the key to enter the menu
2 Scroll to the iLOC menu using the or keys
3 Press the key (locator) or the key (transmitter)
to enter the iLOC menu
4 Scroll up or down to the OFF option
5 Press the key to switch Bluetooth off and return
to the previous menu
11.3 Pairing to an iLOC
transmitter
To pair to a transmitter you require an iLOC enabled
model such as the Tx-10B.
Before you begin, try to switch off all nearby Bluetooth
equipment as they may interfere with the locator and
transmitter's pairing process.
On the locator:
1 Press the key to enter the menu
2 Scroll to the iLOC menu using the or keys
3 Press the key to enter the iLOC menu
4 Scroll to the PAIR option
On the transmitter:
5 Press the key to enter the menu
6 Scroll to the iLOC menu using the or keys
7 Press the key to enter the iLOC menu
8 Scroll to the PAIR option
Starting the pairing process:
9 Press the key on the transmitter followed by the
key on the locator.
NOTE: You should press these keys within a 30 second
window otherwise the connection may time out
10 The transmitter and the locator will now attempt to
pair
When pairing is in progress, the transmitter and locator
will display a flashing Bluetooth icon. Pairing can take up
to a minute. If the pairing process is successful, the
transmitter will display the icon and the locator will
display a persistent Bluetooth icon for the duration of the
connection.
If pairing fails, ensure that any nearby Bluetooth devices
are switched off or invisible then repeat the process.
To Next Page
Loading...
